Cleaning Evoque MAP Airflow Sensor

Cleaning Evoque MAP Airflow Sensor

This is a discussion on Cleaning Evoque MAP Airflow Sensor within the Evoque Maintenance forums, part of the Land Rover Evoque Garage category; I decided to catch up on the maintenance on my 2013 Evoque coupe, 23,000 miles. This time I included cleaning the MAP airflow sensor. I ...

Results 1 to 5 of 5
Like Tree3Likes
  • 3 Post By mstraka

Thread: Cleaning Evoque MAP Airflow Sensor

  1. #1
    Senior Member
    Member #
    1903
    Join Date
    Jul 2013
    Posts
    242

    Cleaning Evoque MAP Airflow Sensor

    I decided to catch up on the maintenance on my 2013 Evoque coupe, 23,000 miles. This time I included cleaning the MAP airflow sensor. I applied a few shots of MAP cleaner from a spray can using the applicator straw. The end result was the restoration of a very smooth idle and better throttle response that had slowly decreased over the miles. So easy to remove, the sensor is located right after the airbox. Five minute job unless you drop a torx screw into the engine compartment. Unplug the wire connection to the sensor and remove the two 20 torx screws holding it to the air tube. Pulls right out. Be careful not to touch the tiny delicate wire/bulb sensor that is to be cleaned.
    Rovingvic, Rsquared and DVFlyer like this.

  2. # ADS
    Ads


  3. #2
    Junior Member
    Member #
    6704
    Join Date
    Apr 2014
    Posts
    19
    What brand of MAP cleaner did you use?

  4. #3
    Senior Member
    Member #
    1903
    Join Date
    Jul 2013
    Posts
    242
    Quote Originally Posted by inyrdreams View Post
    What brand of MAP cleaner did you use?
    CRC Mass Airflow Sensor Cleaner.

  5. Remove Advertisements
    EvoqueForums.net
    Advertisements
     

  6. #4
    Junior Member
    Member #
    6704
    Join Date
    Apr 2014
    Posts
    19
    Quote Originally Posted by mstraka View Post
    CRC Mass Airflow Sensor Cleaner.
    This one right? Thanks by the way...
    Name:  7070079_crc_05110_pri_detl.jpg
Views: 373
Size:  5.5 KB

  7. #5
    Senior Member
    Member #
    1903
    Join Date
    Jul 2013
    Posts
    242
    Quote Originally Posted by inyrdreams View Post
    This one right? Thanks by the way...
    Name:  7070079_crc_05110_pri_detl.jpg
Views: 373
Size:  5.5 KB
    Yes. It shows a throttle body part on its label as its also used for cleaning it. My guess is that its probably very similar if not the same as carburetor cleaner, but that's just my opinion.

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. P0196 Oil Temp Sensor
    By Engineer in forum Evoque Maintenance
    Replies: 4
    Last Post: 08-29-2014, 11:55 AM
  2. Cleaning the Touch Screen
    By mstraka in forum Evoque Detailing
    Replies: 2
    Last Post: 04-13-2014, 07:54 PM
  3. Cleaning the inside of the Evoque?
    By knight3136 in forum Evoque Accessories
    Replies: 3
    Last Post: 01-30-2014, 04:41 PM
  4. Hood sensor problem
    By DrBonz in forum Evoque Forum
    Replies: 6
    Last Post: 08-16-2013, 08:09 PM
  5. TMPS Sensor question?
    By redrover in forum Evoque Forum
    Replies: 3
    Last Post: 05-08-2013, 07:49 PM

Search tags for this page

mass air flow sensor location evoque

Click on a term to search for related topics.
Find us on Google+
 

SEO by vBSEO ©2011, Crawlability, Inc.